[/td][/tr] [tr][td][b]maxresults[/b][/td][td]uint32[/td][td][/td][td]Maximum number of results to return in report. (Default is 1000 if no value is set) Note that the number of results returned might be less than maxresults, even when they are more results. Maximum number of results is 50000. …
Only required if [code-inline]usersession[/code-inline] in [webapi]ISteamMicroTxn/InitTxn[/webapi] was set to [b]web[/b].[/td][/tr] [/table] Retrieves details for a user's purchasing info. These details are based upon the user's Steam wallet. …
[docimg=xbox360_controller_face.png]xbox360_controller_face.png[/docimg] [subsection=Joysticks]Joysticks[/subsection] [b]Analog, 2 axes[/b] (+ digital "click") Like most other gamepads, the Xbox 360 controller features two analog joysticks, on the left and right side, vertically offset. Like most modern joysticks, the sticks themselves can be clicked in as additional digital buttons. [docimg=xbox360_controller_joysticks.png]xbox360_controller_joysticks.png[/docimg] [subsection=BackAndStart]BACK and START[/subsection] [b]Digital[/b] The BACK and START buttons are on either side of the Guide Button. …
However, the Steam Input configurator is able to fix this; the player may set a threshold that distinguishes a "full pull" from a "soft pull." [docimg=xbox360_controller_triggers.png]xbox360_controller_triggers.png[/docimg] [subsection=DPAD]Digital pad[/subsection] [b]Digital[/b] The Xbox 360 controller features a fairly standard digital pad, or DPAD. …
Variations: [list] [*] Left Trackpad [*] Right Trackpad [*] Center Trackpad [/list] Sub-inputs: [list] [*] The touch surface itself (analog) [*] Clicking the surface (digital) [/list] [section]Joystick[/section] [docimg=input_joystick_1.png]input_joystick_1.png[/docimg] Joysticks are available on virtually all modern controllers. The PlayStation 4 and Xbox controllers all feature twin sticks, but the Steam Controller only has one, which is considered the "Left Joystick" in this case. …
Variations: [list] [*] Left Trigger [*] Right Trigger [/list] Sub-inputs: [list] [*] Analog pull [*] Digital click* [/list] [i]*Of the four major supported controller models, only the Steam Controller supports a discrete digital "click" at the end of a full pull. However, the player can set a threshold in the Steam Input Configurator to emulate this behavior for all other controller models.[/i] [section]Gyro[/section] [docimg=input_gyro.png]input_gyro.png[/docimg] The Steam Controller, PlayStation 4 controller and the recently added PS5 (DualSense) feature internal gyroscopes which allow for motion controls, aim assist, etc. …
Unlike other controllers, they are not vertically offset. Like most modern joysticks, the sticks themselves can be clicked in as additional digital buttons. [docimg=ds4_controller_joysticks.png]ds4_controller_joysticks.png[/docimg] [subsection=ShareAndOptions]SHARE and OPTIONS[/subsection] [b]Digital[/b] The SHARE and OPTIONS buttons are on either side of the central touchpad. …
However, the Steam Input configurator is able to fix this; the player may set a threshold that distinguishes a "full pull" from a "soft pull." [docimg=ds4_controller_l2_r2.png]ds4_controller_l2_r2.png[/docimg] [subsection=DPAD]Dpad[/subsection] [b]Digital[/b] The PlayStation 4 controller features a fairly standard digital pad, or Dpad. …
Action Set Layers are optional sets of action bindings which can be overlaid upon an existing set of controls. In contrast to Action Sets, layers draw their actions from the Action Set they exist within and do not wholesale replace what is already active when applied, but apply small modifications. …
Decide what input should trigger the action set layer, and open the binding menu, then click the action set activation icon, which is the leftmost special icon: [docimg=bind_action_set.png]bind_action_set.png[/docimg] This brings up the action set activation menu: [docimg=change_action_set.png]change_action_set.png[/docimg] In this case we want to apply a layer, not activate an action set. …
Note that you should only use the appID for your “base” game--do not use the appID for DLC, Demos, Soundtracks, or other secondary application types. [docimg=stream3.png]stream3.png[/docimg] [*]Set Your Broadcast Permissions By default, your stream is set to “Friends Only”, which means it’s only visible by you and your friends on Steam. …
Below are steps to get your stream set up in OBS. Steam supports any broadcast software that supports the RTMP protocol. [docimg=stream5.png]stream5.png[/docimg] [olist] [*]Navigate to File-->Settings-->Stream [*]In the dropdown menu, select “Custom...” …
If your network connection is interrupted then the upload session will automatically close. Most modern streaming software will automatically establish a new connection to continue streaming. This new connection would create a new upload session and it will automatically associate itself with an existing broadcast session (if one exists). …
[section]Overview[/section] You can manage the Virtual Reality settings for your application on Steamworks in two places: [list][*]Steamworks Settings - Set the SteamVR input binding mode for your application, as well as launch options. [*]Store Page - Describe your VR requirements and supported configurations[/list] [section]Steamworks Settings[/section] Steamworks settings enable you to define the SteamVR input binding mode for your application, and define your launch options. …
Launch options allow you to let users select these options in a more intuitive way. To set launch options, select "Edit Steamworks Settings" from the App Landing Page. Under "Installation", select "General.…
[subsection]3) Generative Artificial Intelligence Content[/subsection] The third part of the survey deals with generative artificial intelligence in your development or product. We are aware that many modern game development environments have AI powered tools built into them. Efficiency gains through the use of these tools is not the focus of this section. …
SteamVR offers a rich set of customizable settings to the user. To ensure that a game will run well out-of-the-box, a developer can suggest tailored default user settings for their game on Steam Frame, including the refresh rate or the display resolution that should be optimal for the experience. A user can further refine these settings in [b]VR Settings -> Video -> Per-Application Video Settings[/b]. A user can also use [b]Reset to Default[/b] to restore the default settings suggested for this game. …
This will allow you to [b]ssh[/b], [b]adb[/b], and [b]rdp[/b] into your headset. You will find this at [b]Steam Settings > System > Enable Developer Mode[/b]. [docimg=steamframe-devmode_1.png]steamframe-devmode_1.png[/docimg] Then on the left, scroll down to the [b]Developer[/b] section, scroll toward the bottom of that page and click [b]Set User Password[/b]. …
[section]Changing Your Device Name[/section] If you are in an office full of other Steam Frames you will want to rename your device so you don't cause network collisions. Once you are logged in you can go to [b]Steam Settings > System > Hostname[/b] and change it to whatever you like. Then anywhere in these documents you see [b]frame[/b] as a hostname, just know to change it to whatever you have set here. …
Customers who decide to stop at the age gate are still recorded as having clicked the UTM link. [h4]Q. What devices are supported?[/h4] A. Any device with a modern browser capable of showing the Steam store is supported. This includes mobile devices and tablets. We do not currently display which types of devices customers are using when they visit the store page via a UTM link click. …
This can be difficult to prevent because the UTM report does not: [list][*]Reveal which purchases belong to which UTM parameters, only the total number of purchases for each unique set of UTM parameters [*]Adjust totals for refunds occurring 4 days or later after the UTM visit. We consider the UTM visit fully processed at 4 days. …
[/list] [subsection]Base Game Set[/subsection] Every game has a [b]Base game achievements[/b] set. Achievements that aren't assigned to another set belong to the base game set, so if you don't create any additional sets, all of your achievements are in the base game set. …
[subsection]Deleting a Set[/subsection] Open the set's menu and choose [b]Delete set[/b]. You must move or delete all achievements in a set before you can delete it. …
There are two ways that Workshop items can get version information set: Mod authors can set this information, or your uploader tool can set this information. [olist] [*][b]Mod authors can set supported versions[/b] - Mod authors in the Steam Workshop can set version support by visiting the item history page and using the UI to configure which versions of the game work for each version of their Workshop item. [*][b]Your Workshop uploader can set supported versions[/b] - If your Workshop item uploader tool can validate support for an item, you can automatically mark it as supporting the appropriate versions, or you can build UI to make it easy for the mod author to choose supported versions and ranges at time of upload. …
If the [i]minimum[/i] branch is not set, then the item is valid for all Steam branches older than the [i]maximum[/i] branch, and vice-versa for when the [i]maximum[/i] branch is not set. …
This metadata can be returned from queries without having to download and install the actual content. [*] [api]ISteamUGC::SetItemVisibility[/api] - Sets the visibility of an item. [*] [api]ISteamUGC::SetItemTags[/api] - Sets arbitrary developer specified tags on an item. [*] [api]ISteamUGC::AddItemKeyValueTag[/api] - Adds a key-value tag pair to an item. …
This will only return workshop items that have a key = [param]pKey[/param] and a value = [param]pValue[/param]. [*] [api]ISteamUGC::SetReturnOnlyIDs[/api] - Sets whether to only return IDs instead of all the details on a pending UGC Query. This is useful for when you don't need all the information (e.g. you just want to get the IDs of the items a user has in their favorites list.) [*] [api]ISteamUGC::SetReturnKeyValueTags[/api] - Sets whether to return any key-value tags for the items on a pending UGC Query. [*] [api]ISteamUGC::SetReturnLongDescription[/api] - Sets whether to return the full description for the items on a pending UGC Query. [*] [api]ISteamUGC::SetReturnMetadata[/api] - Sets whether to return the developer specified metadata for the items on a pending UGC Query. [*] [api]ISteamUGC::SetReturnChildren[/api] - Sets whether to return the IDs of the child items of the items on a pending UGC Query. [*] [api]ISteamUGC::SetReturnAdditionalPreviews[/api] - Sets whether to return any additional images/videos attached to the items on a pending UGC Query. [*] [api]ISteamUGC::SetReturnTotalOnly[/api] - Sets whether to only return the total number of matching items on a pending UGC Query. -- The actual items will not be returned when [api]ISteamUGC::SteamUGCQueryCompleted_t[/api] is called. [*] [api]ISteamUGC::SetLanguage[/api] - Sets the language to return the title and description in for the items on a pending UGC Query. [*] [api]ISteamUGC::SetAllowCachedResponse[/api] - Sets whether results to be will be returned from the cache for the specific period of time on a pending UGC Query. …
This sets the content of your homepage to public so that it can be loaded in the Steam store. [*]Set that homepage as active - Return to the main admin dashboard for your homepage, with 'creator home v2' selected in the left-hand set of options. …
Easily add a set of games, organized as a grid or carousel. You can populate the set of games by manually entering individual games, or have it populate automatically based on criteria or filters. …
[section]Global Settings[/section] Before we start a game we'll need to make some basic choices and set some global settings in Big Picture mode. [subsection]Step 1: Pick a Controller[/subsection] If you're reading this, it's presumably because you want to use a certain controller with a certain game. …
" [docimg=desktop_settings.png]desktop_settings.png[/docimg] From there, select "Controller." [docimg=desktop_settings_controller.png]desktop_settings_controller.png[/docimg] From here you can change the general controller settings, as well as change three different global configurations. …
LinuxArm64 should now appear as a platform choice under the [b]Platforms[/b] button. [subsection]Project Settings[/subsection] In addition to the project settings in the previous section of the documentation, it is also recommended that you change the [b]Targeted RHI[/b] setting in your Project Settings under [b]Platforms - Linux[/b] to [b]Vulkan Mobile (ES3.1)[/b] and disable [b]Vulkan Desktop (SM5)[/b]. …
[/i] To fix this, you must manually specify the project uses a lower SDK/NDK level, and rebuild. In your Project’s settings. Go to [b]Edit > Project Settings > Android SDK > NDK API Level[/b] and set it to [b]android-30[/b] (or, in the future, whichever version is specified after the [b](current version is #XX)[/b] portion of the error). …
[/td][/tr] [tr][td][b]pchHost[/b][/td][td]const char *[/td][td]The host to set this cookie for.[/td][/tr] [tr][td][b]pchUrl[/b][/td][td]const char *[/td][td]The url to set this cookie for.[/td][/tr] [tr][td][b]pchCookie[/b][/td][td]const char *[/td][td]The cookie to set.…
Use [api]ISteamHTTP::SetHTTPRequestAbsoluteTimeoutMS[/api] if you need a strict maximum timeout. [b]Returns:[/b] bool Returns [b]true[/b] upon successfully setting the timeout. …
By default, the only branch defined is Default. If a game is already released, and you choose to set a build live, anyone who owns the game will receive that update in that build (so make sure that you're ready to release an update when you set it live). …
[docimg=setBuildPublic_2.png]setBuildPublic.png[/docimg] [section=Authorizing_Default_Build_Updates]Authorizing Default Build Updates[/section] If your game is released, then any builds set live on your default branch will require an additional authorization step. …