[/td][/tr] [tr][td][b]maxresults[/b][/td][td]uint32[/td][td][/td][td]Maximum number of results to return in report. (Default is 1000 if no value is set) Note that the number of results returned might be less than maxresults, even when they are more results. Maximum number of results is 50000. …
Only required if [code-inline]usersession[/code-inline] in [webapi]ISteamMicroTxn/InitTxn[/webapi] was set to [b]web[/b].[/td][/tr] [/table] Retrieves details for a user's purchasing info. These details are based upon the user's Steam wallet. …
Action Set Layers are optional sets of action bindings which can be overlaid upon an existing set of controls. In contrast to Action Sets, layers draw their actions from the Action Set they exist within and do not wholesale replace what is already active when applied, but apply small modifications. …
Decide what input should trigger the action set layer, and open the binding menu, then click the action set activation icon, which is the leftmost special icon: [docimg=bind_action_set.png]bind_action_set.png[/docimg] This brings up the action set activation menu: [docimg=change_action_set.png]change_action_set.png[/docimg] In this case we want to apply a layer, not activate an action set. …
Note that you should only use the appID for your “base” game--do not use the appID for DLC, Demos, Soundtracks, or other secondary application types. [docimg=stream3.png]stream3.png[/docimg] [*]Set Your Broadcast Permissions By default, your stream is set to “Friends Only”, which means it’s only visible by you and your friends on Steam. …
Below are steps to get your stream set up in OBS. Steam supports any broadcast software that supports the RTMP protocol. [docimg=stream5.png]stream5.png[/docimg] [olist] [*]Navigate to File-->Settings-->Stream [*]In the dropdown menu, select “Custom...” …
These events occur when the application frame times are too high, or the application is being throttled (for example via SteamVR Settings for the application or when using SteamVR Motion Smoothing). [*][b]peakGpu(MHz)[/b]: The peak GPU clock, in Megahertz. [*][b]peakPower(W)[/b]: The peak total system power, in Watts. [*][b]refresh(Hz)[/b]: The headset's refresh rate (as set by the user in the SteamVR Settings for the application). [*][b]throttle[/b]: The frame limit, either set by the user through SteamVR Settings for the application, or by SteamVR when Motion Smoothing is active. [*][b]width[/b] and [b]height[/b]: The minimum resolution of any frame submitted by the application during the period since the last sample. …
Xorg should be the default session, the username is [b]steamos[/b] and the password is whatever you had previously set in Developer Mode settings. [docimg=steamframe-xrdp.png]steamframe-xrdp.png[/docimg] [section]SSH and ADB[/section] After [doclink=steamframe/setup]enabling Developer Mode[/doclink], you can [b]ssh [/b]into the headset using the default user [b]steamos[/b] and whatever password you had set under [b]Developer Mode [/b]settings: [code]ssh steamos@frame[/code] Alternatively, you can [b]adb[/b] into the headset by plugging the headset directly into your PC with a USB cable. …
[section]Overview[/section] You can manage the Virtual Reality settings for your application on Steamworks in two places: [list][*]Steamworks Settings - Set the SteamVR input binding mode for your application, as well as launch options. [*]Store Page - Describe your VR requirements and supported configurations[/list] [section]Steamworks Settings[/section] Steamworks settings enable you to define the SteamVR input binding mode for your application, and define your launch options. …
Launch options allow you to let users select these options in a more intuitive way. To set launch options, select "Edit Steamworks Settings" from the App Landing Page. Under "Installation", select "General.…
[/i] [/b]For example, there is no way you can know exactly when the game will be finished, that the game will be finished, or that planned future additions will definitely happen. Do not ask your customers to bet on the future of your game. …
Please take care of your customers on Steam. 5.[b] [i]Make sure you set expectations properly everywhere you talk about your game.[/i][/b] Be transparent with your community. For example, if you know your updates during Early Access will break save files, make sure you tell players up front. …
[b]Returns:[/b] bool [b]true[/b] if the game is hooking screenshots and is expected to handle them; otherwise, [b]false[/b]. [subsection=SetLocation]SetLocation[/subsection] [code=cpp]bool SetLocation( ScreenshotHandle hScreenshot, const char *pchLocation );[/code] [table] [tr][th]Name[/th][th]Type[/th][th]Description[/th][/tr] [tr][td][b]hScreenshot[/b][/td][td][apitype]ISteamScreenshots::ScreenshotHandle[/apitype][/td][td]The handle to the screenshot to tag.…
[/td][/tr] [tr=k_cubUFSTagValueMax][td][b]k_cubUFSTagValueMax[/b][/td][td]int[/td][td]255[/td][td]The maximum length in bytes of a location metadata string set on a screenshot using [api]ISteamScreenshots::SetLocation[/api].[/td][/tr] [tr=k_nScreenshotMaxTaggedPublishedFiles][td][b]k_nScreenshotMaxTaggedPublishedFiles[/b][/td][td][apitype]steam_api::uint32[/apitype][/td][td]32[/td][td]The maximum number of workshop items that can be tagged in a screenshot using [api]ISteamScreenshots::TagPublishedFile[/api].…
[docimg=MarkAsReady_2.png]MarkAsReady_2.png[/docimg] [section]Release Yourself When Ready[/section] Once your store page has been approved and it's presence has been set to "coming soon" for a least 2 weeks and the build is reviewed, you will be able to release your game. You will need to use the green "Release App" button that appears on the top of your product landing page in Steamworks at the time you wish to release your title. …
[docimg=ReleaseOptions_2.png]ReleaseOptions_2.png[/docimg] After you click "Release App", you'll see a summary of actions that the release process will do, including publishing the store package, setting a launch discount live if you chose to have one, setting the game to playable and released and applying the release timestamp of "NOW". …
[section]Useful Practices[/section] The following suggestions are to help you think about marketing and business decisions when shipping on Steam. These are not a set of instructions that you have to do to be successful and not a substitute for making a great game. [list] [*][b]Treat your project as a unique marketing problem[/b] - A marketing plan for one title may not necessarily translate to another. …
Figure out what features are valuable for your goals and your customers. [*][b]Launch day is the starting line not the finish line[/b] – It's very likely that the game you launch on launch day is not the best it can be. If you're serious about making a great product, you want to continue patching and updating your game. …
If no path is set, or it points to a folder your game doesn't use, nothing will actually sync. [*] [b]Set a quota big enough for your saves[/b] If your save files are larger than your Steam Cloud quota, they won't sync. …
Once all your trading card assets are uploaded, click the edit link beneath "Release State" to configure your card drop settings and mark your assets as ready for review. Once set as ready for review, your cards will automatically appear in our queue to review by a Valve designer. …
[b][code-inline]*[/code-inline][/b] To define the string to display in Steam friends list and chat, set the [code-inline]steam_display[/code-inline] key/value in [url=https://partner.steamgames.com/doc/api/ISteamFriends#SetRichPresence]SetRichPresence[/url]. …
[docimg=party_rp.jpg]When friends playing together are grouped, others know if there is room for them to join[/docimg] [b][code-inline]*[/code-inline][/b] To define the grouping of players in the Steam friends list and chat, set the [code-inline]steam_player_group[/code-inline] and [code-inline]steam_player_group_size[/code-inline] key/values in [url=https://partner.steamgames.com/doc/api/ISteamFriends#SetRichPresence]SetRichPresence[/url]. …
SteamVR offers a rich set of customizable settings to the user. To ensure that a game will run well out-of-the-box, a developer can suggest tailored default user settings for their game on Steam Frame, including the refresh rate or the display resolution that should be optimal for the experience. A user can further refine these settings in [b]VR Settings -> Video -> Per-Application Video Settings[/b]. A user can also use [b]Reset to Default[/b] to restore the default settings suggested for this game. …
This will allow you to [b]ssh[/b], [b]adb[/b], and [b]rdp[/b] into your headset. You will find this at [b]Steam Settings > System > Enable Developer Mode[/b]. [docimg=steamframe-devmode_1.png]steamframe-devmode_1.png[/docimg] Then on the left, scroll down to the [b]Developer[/b] section, scroll toward the bottom of that page and click [b]Set User Password[/b]. …
[section]Changing Your Device Name[/section] If you are in an office full of other Steam Frames you will want to rename your device so you don't cause network collisions. Once you are logged in you can go to [b]Steam Settings > System > Hostname[/b] and change it to whatever you like. Then anywhere in these documents you see [b]frame[/b] as a hostname, just know to change it to whatever you have set here. …
. [*]Once enabled, you'll need to add your games, configure sections and finish most of the merchandising work to organize the games in your sale. [*]Flip over to the 'preview' of your sale page, and you'll see the controls to enable background groupings. …
We set this by selecting the special "action set" button in the binding screen and selecting "Apply Action layer --> System Options" from the pop up menu: [docimg=slime_rancher_radial_menu_config_3.png]slime_rancher_radial_menu_config_3.png[/docimg] Note that the special "action set" button will not appear in the binding menu if you don't have any custom action sets defined. This means that you must create your custom action set layer [i]before[/i] you try to set up the activation toggle for it. See the [doclink=features/steam_controller/action_set_layers][/doclink] article for more info on creating action set layers. …
[b][u]GetDetailedSales Best Practices[/u][/b] [u][b]Step 1:[/b][/u] Call GetChangedDatesForPartner to find the set of dates that have new data. Your first call will use a highwatermark value of 0 and will return every date you have ever had sales or activations on Steam. …
[/td] [/tr] [tr][td][b]highwatermark[/b][/td][td]uint64[/td][td]✔[/td][td]A unique identifier, the point at which to query data forward from. Should be set to 0 on first run.[/td][/tr] [tr][td][b]include_view_grants[/b][/td][td]bool[/td][td][/td][td]Include dates that are visible via view grants in the response[/td][/tr] [/table] Retrieves the set of dates for which financial data has changed since the given highwatermark. …
For that reason, we require that you include the following information anywhere you sell Steam keys for your Early Access title: [olist][*]Display one of these Steam Early Access logos: [docimg=Logo_SteamEarlyAccess_Stacked.png]Steam Early Access[/docimg] OR [docimg=Logo_SteamEarlyAccess.png]Steam Early Access[/docimg] (download [docfile=SteamEarlyAccessLogos-All.zip]SteamEarlyAccessLogos.zip[/docfile] for all languages) [*]Include this text, clearly legible on the page: [b]This Steam Early Access game is currently not a finished game and may or may not change significantly over the course of development. To learn more about Steam Early Access, please visit http://store.steampowered.com/earlyaccessfaq/[/b] [*]Clearly describe the current state of your game. …
[url=https://store.steampowered.com/points/shop/c/stickers](Click here to see examples live in the Points Shop.)[/url][/h4] Sticker sets have been designed and animated in the past by the following animators (feel free to reach out to them for their availability and interest!)…
This image will be used to represent your startup movie in a user's inventory and in Steam client settings. [list] [*]No alpha is permitted. [*]No animation is permitted - it must be a single frame image. [*].png, .jpg and .webp are all accepted. …
[/td][/tr] [tr=k_cbMaxGameServerGameDir][td][b]k_cbMaxGameServerGameDir[/b][/td][td]int[/td][td]32[/td][td]The maximum size (in UTF-8 bytes, including the null terminator) supported for the game server mod dir which is set with [api]ISteamGameServer::SetModDir[/api].[/td][/tr] [tr=k_cbMaxGameServerMapName][td][b]k_cbMaxGameServerMapName[/b][/td][td]int[/td][td]32[/td][td]The maximum size (in UTF-8 bytes, including the null terminator) supported for game server map names which is set with [api]ISteamGameServer::SetMapName[/api].[/td][/tr] [tr=k_cbMaxGameServerName][td][b]k_cbMaxGameServerName[/b][/td][td]int[/td][td]64[/td][td]The maximum size (in UTF-8 bytes, including the null terminator) supported for game server names which is set with [api]ISteamGameServer::SetServerName[/api].[/td][/tr] [tr=k_cbMaxGameServerTags][td][b]k_cbMaxGameServerTags[/b][/td][td]int[/td][td]128[/td][td]The maximum size (in UTF-8 bytes, including the null terminator) supported for game server tags which is set with [api]ISteamGameServer::SetGameTags[/api].…
[section]Content Survey Sections[/section] The content survey contains three primary sections that all must be completed prior to submitting the game to the [url=https://partner.steamgames.com/doc/store/review_process]Review Process[/url] [subsection]1) General Content[/subsection] The first part of the content survey includes a range of topics that may be present in your game. Finishing this section will generate ratings for several regional rating boards that will be displayed on your storepage once the game releases. …